UR-W295CDAMR
Compact, easy operation and further powerful
|
 |
Options and Accessories
- Turn Over Prevention Device
When the stability decreases, the Turn Over Prevention Device allows the alarm buzzer to beep continuously - "Beeee" - and automatically stops the crane operation.
- Radio remote control
This permits the operator to have on-the-spot hand control of lifting operations by remote control via radio waves at safe distances. It ensures safe, accurate one-man operation-with energy saving.
- Automatic hook stow system
Controlling stowing is very easy with switch operation from the operating panel.
|
| |
| Specifications |
| Engine Type |
Gasoline engine |
| Capacity |
2.93t at 1.4 m |
| Working Radius |
0.48 m to 8.41 m |
| Hook Height above ground level (Approx) |
Max 8.8 m |
| Hook Height below ground level (Approx) |
Max 11.5 m with 4-part line |
| Boom Length |
Min 2.70 m to Max 8.65 m |
| Boom Extending Speed |
5.95 m / 21.0 sec (when using engine) |
| Boom Raising Speed |
0° to 78° / 12 sec (when using engine) |
| Boom Section |
5 Section box beam type telescoping boom |
| Wire Rope |
Construction: IWRC 6 X WS (26) GRADE B / Diameter and Length: 8.0 mm X 54.0 m / Breaking Strength: 42.4kN {4,320 Kgf} |
| Winch |
Hydraulic motor driven, spur gear reduction, with automatic mechanical brake |
| Winch Speed (Single Line) |
40.0 m / min at 4th Layer (when using engine) |
| Hook Speed (4 part Line) |
10.0 m / min at 4th Layer (when using engine) |
| Hock Block |
2.9t Capacity with 2 Sheaves and Safety Latch |
| Swing (Slewing) |
Trochoid motor, worm gear reduction, spur gear reduction, and worm self-locking brake (supported by ball bearings) |
| Slewing Range |
360° Continuous Rotation on a ball bearing race |
| Slewing Speed |
1.5 rpm (when using engine) |
| Outriggers |
2-section (with dumper) for bend and 3-section extension.
Double acting hydraulic cylinders with pilot-operated check values, direct pushing type. (Directly connected with hydraulic automatic lock device) |
| Oil Tank |
27 Liter Capacity |
| Safety Devices |
- Pressure relief valve for hydraulic circuit
- Counterbalance valves for boom raising and boom telescoping cylinders
- Pilot-operated check valves for outrigger cylinders
- Boom angle indicator with load indicator
- Hook safety latch
- Automatic mechanical brake for winch
- Automatic stop for overwinding
- Overwinding alarm
- Emergency stop button (Ignition cut)
- Inter-lock device of crane and crawling levers
- Inter-lock device of crane and outriggers
- Turn over prevention device
- Level
- Slewing restriction limit switch
|
| Crawling Gear |
| Crawling |
Endless rubber crawler |
| Crawler |
180 X 40 X 72FR |
| Tread Length |
1050 mm |
| Ground Contact Pressure |
54.2 kPa {0.55 kgf/cm2} |
| Crawling Speed |
0~2.0 km/h, forward/reverse (when using engine) |
| Hill Climbing Ability |
12° |
| Engine |
7.4 kW (10ps)/2600rpm, Rated output |
| Steering |
Hydraulic drive independent of left/right |
| Starter |
Starter motor |
| Fuel Tank |
10 Litres capacity |
| Measurements & Weight |
| Total Width |
600 mm |
| Total Height |
1,450 mm |
| Total Length |
2,905 mm |
| Gross Weight |
2,090 kg |
Rated Loads (Unit : kg)
| All Booms Retracted and Second Stage Extended |
| Working Radius (m) |
~1.0 |
1.4 |
1.5 |
1.8 |
2.0 |
2.5 |
3.0 |
3.5 |
3.835 |
| Outrigger Extended to Maximum |
2,93 |
2,93 |
2,68 |
2,28 |
2,08 |
1,68 |
1,33 |
1,03 |
0.93 |
| Outrigger Extended not to Maximum |
2,03 |
2,03 |
2,03 |
1,48 |
1,13 |
0.68 |
0.52 |
0.38 |
0.28 |
| Third Stage Extended |
| Working Radius (m) |
~2.2 |
2.5 |
2.9 |
3.0 |
3.5 |
4.0 |
4.5 |
5.0 |
5.37 |
| Outrigger Extended to Maximum |
1.38 |
1.38 |
1.38 |
1.28 |
1.03 |
0.83 |
0.68 |
0.55 |
0.46 |
| Outrigger Extended not to Maximum |
0.83 |
0.68 |
0.56 |
0.53 |
0.41 |
0.31 |
0.25 |
0.19 |
0.15 |
| Fourth Stage Extended |
| Working Radius (m) |
~3.4 |
3.8 |
4.0 |
4.5 |
5.0 |
5.5 |
6.0 |
6.5 |
6.89 |
| Outrigger Extended to Maximum |
0.88 |
0.88 |
0.78 |
0.63 |
0.53 |
0.45 |
0.39 |
0.35 |
0.3 |
| Outrigger Extended not to Maximum |
0.45 |
0.37 |
0.33 |
0.28 |
0.22 |
0.17 |
0.13 |
0.11 |
0.09 |
| Fifth Stage Extended |
| Working Radius (m) |
~3.8 |
4.1 |
4.5 |
5.0 |
5.5 |
6.0 |
6.5 |
7.0 |
8.0 |
8.41 |
| Outrigger Extended to Maximum |
0.58 |
0.58 |
0.48 |
0.4 |
0.34 |
0.3 |
0.26 |
0.23 |
0.18 |
0.16 |
| Outrigger Extended not to Maximum |
0.38 |
0.32 |
0.28 |
0.23 |
0.19 |
0.16 |
0.13 |
0.1 |
0.07 |
0.06 |
|
