| Specifications |
| Engine Type |
Gasoline engine |
| Capacity |
2.93t at 1.4 m |
| Working Radius |
0.45 m to 8.41 m |
| Hook Height above ground level (Approx) |
Max 8.8 m |
| Hook Height below ground level (Approx) |
Max 11.7 m with 4-part line |
| Boom Length |
Min 2.53 m to Max 8.65 m |
| Boom Extending Speed |
6.12 m / 22.0 sec |
| Boom Raising Speed |
0° to 78° / 12 sec |
| Boom Section |
5 Section box beam type telescoping boom |
| Wire Rope |
Construction: IWRC 6 X WS (26) GRADE B / Diameter and Length: 8.0 mm X 54.0 m / Breaking Strength: 42.4kN {4,320 Kgf} |
| Winch |
Hydraulic motor driven, spur gear reduction, with automatic mechanical brake |
| Winch Speed (Single Line) |
40.0 m / min at 4th Layer |
| Hook Speed (4 part Line) |
10.0 m / min at 4th Layer |
| Hock Block |
2.9t Capacity with 2 Sheaves and Safety Latch |
| Swing (Slewing) |
Trochoid motor, worm gear reduction, spur gear reduction, and worm self-locking brake (supported by ball bearings) |
| Slewing Range |
360° Continuous Rotation on a ball bearing race |
| Slewing Speed |
1.5 rpm |
| Outriggers |
2-section (with dumper) for bend and 3-section extension.
Double acting hydraulic cylinders with pilot-operated check values, direct pushing type. (Directly connected with hydraulic automatic lock device)
Outrigger sharpest angle: 2250 mm nearest width
4200 mm nearest length |
| Oil Tank |
27 Liter Capacity |
| Safety Devices |
- Pressure relief valve for hydraulic circuit
- Counterbalance valves for boom raising and boom telescoping cylinders
- Pilot-operated check valves for outrigger cylinders
- Boom angle indicator with load indicator
- Hook safety latch
- Automatic mechanical brake for winch
- Automatic stop for overwinding
- Overwinding alarm
- Emergency stop button (Ignition cut)
- Inter-lock device of crane and crawling levers
- Inter-lock device of crane and outriggers
- Turn over prevention device
- Level
- Slewing restriction limit switch
|
