UR-W295CRS
Compact, easy operation and further powerful
|
 |
Options and Accessories
- Turn Over Prevention Device
When the stability decreases, the Turn Over Prevention Device allows the alarm buzzer to beep continuously - "Beeee" - and automatically stops the crane operation.
- Radio remote control
This permits the operator to have on-the-spot hand control of lifting operations by remote control via radio waves at safe distances. It ensures safe, accurate one-man operation-with energy saving.
- Automatic hook stow system
Controlling stowing is very easy with switch operation from the operating panel.
- Tough, smooth winding winch
This powerful, dependable winch's plunger motor ensures smooth winding in operations of all kinds.
- Anti two-block system
No fear of the hook striking the boom ti, hence greater safety.
|
| |
| Specifications |
| Engine Type |
Gasoline engine |
| Capacity |
2,930 Kg at 1.4 m |
| Working Radius |
0.45 m to 8.41 m |
| Hook Height above ground level (Approx) |
Max 8.8 m |
| Hook Height below ground level (Approx) |
Max 11.7 m |
| Boom Length |
Min 2.53 m to Max 8.65 m |
| Boom Extending Speed |
6.12 m / 20.0 sec |
| Boom Section |
5 Section |
| Wire Rope |
Construction: IWRC 6 X WS (26) B type / Diameter and Length: 8.0 mm X 54.0 m / Breaking Strength: 4,320 Kg |
| Boom Structure |
6 Sided (Hexagonal) Box Beam with Angle Indicator and Anti-Two-Block Boom is Full Hydraulic Powered |
| Boom Telescopic Cylinder |
Double Acting type with Counterbalance Valve |
| Boom Raising Angle / Speed |
0° to 78° / 11.0 sec |
| Boom Raising Cylinder |
Double Acting type with Counterbalance Valve |
| Winch |
Oversized Drum for extra long cables and hoists. Winch Hook Designed to match the crane capacity.
Can be used with Nylon Slings. Hydraulic Axial Plunger Type Motor, Spur Gear Reduction, with Automatic Brake. |
| Winch Speed (Single Line) |
40.0 m / min at 4th Layer |
| Hook Speed (4 part Line) |
10.0 m / min at 4th Layer |
| Hock Block |
3,030 kg Capacity with 2 Sheaves and Latch |
| Swing (Slewing) |
Hydraulic Motor Axial Plunger Type Driven, on a Ball Bearing Race.
Worm and Spur Gear Reduction, Worm Self-Locking Holding Brake. |
| Swing Rotation |
360° Continuous Rotation (Right or Left) Non-Stop |
| Swing Speed |
1.5 rpm |
| Outriggers |
Double Acting Hydraulic Cylinders with Pilot Operated Check Valves |
| Oil Tank |
27 Liter Capacity |
| Safety Devices |
Turn Over Prevention Device / Pressure Relieve Valve for Hydraulic Circuit / Counterbalance Valves for Boom Raising and Boom Telescoping Cylinders / Pilot-operated Check Valves for Vertical Outrigger Cylinders / Boom Angle Indicater with Load Indicater / Automatic Mechanical Brake for Winch / Hook Safety Latch / Overwinding Alarm / Anti two-block system / Load Meter / Level / Crane and running Lever Interlock Device |
| Crawling Gear |
| Horsepower |
13.0 PS / 2,000 rpm (9.6 kW / 2,000 rpm) |
| Fuel Tank |
7 Liter Capacity |
| Maximum Speed (Forward and Backward) |
2.3 km/h |
| Ground Length |
1,050 mm |
| Ground Pressure |
0.49 kgf / cm2 (48.0 kPa) |
| Steering |
Left and Right Independent Hydraulic System |
| Parking-brake |
Hydraulic Motor built in Disk Brake |
| Hill Climbing Stability |
20° |
| Measurements & Weight |
| Total Width |
600 mm |
| Total Height |
1,375 mm |
| Total Length |
2,690 mm |
| Wheel-Base |
1,050 mm |
| Gross Weight |
1,850 kg |
Rated Loads (Unit : kg)
| All Booms Retracted and Second Stage Extended |
| Working Radius (m) |
~1.0 |
1.4 |
1.5 |
1.8 |
2.0 |
2.5 |
3.0 |
3.5 |
3.83 |
| Outrigger Extended to Maximum |
2,930 |
2,930 |
2,680 |
2,280 |
2,080 |
1,680 |
1,330 |
1,030 |
930 |
| Outrigger Extended not to Maximum |
2,030 |
2,030 |
2,030 |
1,480 |
1,130 |
680 |
520 |
380 |
280 |
| Third Stage Extended |
| Working Radius (m) |
~2.2 |
2.5 |
2.9 |
3.0 |
3.5 |
4.0 |
4.5 |
5.0 |
5.37 |
| Outrigger Extended to Maximum |
1,380 |
1,380 |
1,380 |
1,280 |
1,030 |
830 |
680 |
550 |
460 |
| Outrigger Extended not to Maximum |
830 |
680 |
560 |
530 |
410 |
310 |
250 |
190 |
150 |
| Fourth Stage Extended |
| Working Radius (m) |
~3.4 |
3.8 |
4.0 |
4.5 |
5.0 |
5.5 |
6.0 |
6.5 |
6.89 |
| Outrigger Extended to Maximum |
880 |
880 |
780 |
630 |
530 |
450 |
390 |
350 |
300 |
| Outrigger Extended not to Maximum |
450 |
370 |
330 |
280 |
220 |
170 |
130 |
110 |
90 |
| Fifth Stage Extended |
| Working Radius (m) |
~3.8 |
4.1 |
4.5 |
5.0 |
5.5 |
6.0 |
6.5 |
7.0 |
8.0 |
8.41 |
| Outrigger Extended to Maximum |
580 |
580 |
480 |
400 |
340 |
300 |
260 |
230 |
180 |
160 |
| Outrigger Extended not to Maximum |
380 |
320 |
280 |
230 |
190 |
160 |
130 |
100 |
70 |
60 |
|
