UR-W375CDRS
Compact, easy operation and further powerful
|
 |
Features
- Turn Over Prevention Device
When the stability decreases, the Turn Over Prevention Device allows the alarm buzzer to beep continuously - "Beeee" - and automatically stops the crane operation.
- Over Loading Alarm
When overload occurs, the Moment Limiter Device allows the alarm buzzer to beep continuously.
- Digital Load Meter
Digital Load Meter gives cargo weight and help operators in safety work.
- Outrigger Inter-Lock Device
When Boom is not retracted completely, unable to operate riggers.
- Traveling Lever Inter-Lock Device
Equipped Inter-Lock Device which switches Traveling and Operation. If mis-operate the traveling lever when operating, crane does not travel.
- Overlowering Prevention Device
When lowering the hook below ground level, the rope winding the winch drum stops at a point 3 turns before completion to prevent the wire rope from causing damage; the overlowering prevention device.
- Emergency Stop Switch
Secure the safety, so Engine and all functions are to be stopped by emergency stop.
- Radio Remote Control
Permits the operator to have on-the-spot hand control of lifting operations by remote control via radio waves at safe distance.
It ensures, safe, accurate one-man operation-with energy savings.
Options and Accessories
- 200V and 400V Electric Power Pack
Clean and Silent work for interior and night operation.
- Dismantle Option
Able to dismantle Boom and Outriggers, etc. and convey by helicopter and ropeway.
- Dismantle and self-assemble Option
Components can be self-assembled in confined locations using the crane's own winch and tools.
|
| Specifications |
| Capacity |
2,930 Kg at 2.5 m |
| Working Radius |
0.62 m to 12.14 m |
| Hook Height above ground level (Approx) |
Max. 12.6 m |
| Hook Height below ground level (Approx) |
Max. 15.6 m |
| Boom Length |
Min. 3.54 m to Max. 12.30 m |
| Boom Extending Speed |
8.76 m / 20.0 sec |
| Boom Section |
5 Section |
| Wire Rope |
Construction: IWRC 6 X WS (26) B type / Diameter and Length: 8.0 mm X 73.5 m / Breaking Strength: 4,320 Kg |
| Boom Structure |
6 Sided (Hexagonal) Box Beam with Angle Indicator and Anti-Two-Block Boom is Full Hydraulic Powered |
| Boom Telescopic Cylinder |
Double Acting type with Counterbalance Valve |
| Boom Raising Angle / Speed |
0° to 80° / 10.0 sec |
| Boom Raising Cylinder |
Double Acting type with Counterbalance Valve |
| Winch |
Oversized Drum for extra long cables and hoists. Winch Hook Designed to match the crane capacity.
Can be used with Nylon Slings. Hydraulic Axial Plunger Type Motor, Spur Gear Reduction, with Automatic Brake. |
| Winch Speed (Single Line) |
68.0 m / min at 4th Layer |
| Hook Speed (4 part Line) |
17.0 m / min at 4th Layer |
| Hock Block |
2,930 kg Capacity with 2 Sheaves and Latch |
| Swing (Slewing) |
Hydraulic Motor Axial Plunger Type Driven, on a Ball Bearing Race.
Worm and Spur Gear Reduction, Worm Self-Locking Holding Brake. |
| Swing Rotation |
360° Continuous Rotation (Right or Left) Non-Stop |
| Swing Speed |
2.5 rpm |
| Outriggers |
Double Acting Hydraulic Cylinders with Pilot Operated Check Valves |
| Oil Tank |
70 Liter Capacity |
| Safety Devices |
Turn Over Prevention Device / Overloading Alarm / Pressure Relieve Valve for Hydraulic Circuit / Counterbalance Valves for Boom Raising and Boom Telescoping Cylinders / Pilot-operated Check Valves for Vertical Outrigger Cylinders / Boom Angle Indicater with Load Indicater / Automatic Mechanical Brake for Winch / Hook Safety Latch / Overwinding Alarm / Anti two-block system / Overlowering Prevention Device / Digital Load Meter / Level / Crane and Running Lever Interlock Device / Outrigger Inter-Lock Device / Traveling Lever Inter-Lock Device / Emergency Stop Switch |
|
| Crawling Gear |
| Horsepower |
24.5 PS / 2,100 rpm (18 kW / 2,100 rpm) |
| Fuel Tank |
40 Liter Capacity |
| Maximum Speed (Forward and Backward) |
3.0 km/h |
| Ground Length |
1,750 mm |
| Ground Pressure |
0.36 kgf / cm2 (35.6 kPa) |
| Steering |
Left and Right Indpendent Hydraulic System |
| Parking Brake |
Hydraulic Motor built in Disk-Brake |
| Hill Climbing Stability |
23° |
| Measurements & Weight |
| Total Width |
1,300 mm |
| Total Height |
1,720 mm |
| Total Length |
4,250 mm |
| Wheel-Base |
1,750 mm |
| Gross Weight |
3,810 kg |
| All Booms Retracted and Second Stage Extended |
| Working Radius (m) |
~2.5 |
3.0 |
3.5 |
4.0 |
4.5 |
5.0 |
5.69 |
| Outrigger Extended to Maximum (kg) |
2,930 |
2,380 |
1,980 |
1,700 |
1,480 |
1,330 |
1,150 |
| Outrigger Extended to Halfway (kg) |
2,930 |
2,360 |
1,960 |
1,680 |
1,350 |
1,050 |
800 |
| Outrigger Extended to Minimum (kg) |
2,930 |
2,330 |
1,650 |
1,250 |
930 |
780 |
650 |
| Third Stage Extended |
| Working Radius (m) |
~2.7 |
3.0 |
3.5 |
4.0 |
4.5 |
5.0 |
5.5 |
6.0 |
7.0 |
7.82 |
| Outrigger Extended to Maximum (kg) |
2,270 |
2,120 |
1,680 |
1,430 |
1,250 |
1,100 |
980 |
870 |
720 |
620 |
| Outrigger Extended to Halfway (kg) |
2,270 |
2,090 |
1,680 |
1,420 |
1,240 |
1,070 |
950 |
800 |
500 |
330 |
| Outrigger Extended to Minimum (kg) |
2,270 |
2,090 |
1,680 |
1,330 |
1,050 |
850 |
680 |
560 |
380 |
290 |
| Fourth Stage Extended |
| Working Radius (m) |
~4.0 |
4.5 |
5.0 |
6.0 |
7.0 |
8.0 |
9.0 |
9.98 |
| Outrigger Extended to Maximum (kg) |
1,070 |
980 |
880 |
770 |
670 |
570 |
500 |
430 |
| Outrigger Extended to Halfway (kg) |
1,060 |
950 |
860 |
700 |
550 |
410 |
310 |
240 |
| Outrigger Extended to Minimum (kg) |
1,060 |
950 |
840 |
600 |
420 |
300 |
200 |
140 |
| Fifth Stage Extended |
| Working Radius (m) |
~4.5 |
5.0 |
6.0 |
7.0 |
8.0 |
9.0 |
10.0 |
11.0 |
12.14 |
| Outrigger Extended to Maximum (kg) |
780 |
650 |
510 |
420 |
370 |
330 |
300 |
270 |
260 |
| Outrigger Extended to Halfway (kg) |
780 |
650 |
500 |
410 |
360 |
300 |
250 |
190 |
140 |
| Outrigger Extended to Minimum (kg) |
780 |
650 |
500 |
410 |
340 |
270 |
200 |
140 |
80 |
|
| Go to top |
| |
|
|
|
|
